Glossary


Active cooling fan

The fan that cools the plastic filament as it extrudes.

Build plate

The surface on which the 3D Printer makes the object.

Build platform

The support for the build plate. The build platform includes knobs for manual leveling.

Drive gear

A part of the extruder assembly. The Delrin plunger pushes the plastic filament against the drive gear.

Extruder

Draws plastic filament from the spool and pushes it into the nozzle, where it is heated and squeezed onto the build plate.

Extruder Fan

The fan that keeps the 3D Printer motor cool and disperses heat form the heat sink.

Fan guard

A grill that protects the extruder fan and protects the user from the fan.

Filament guide tube

A plastic tube that guides the plastic filament from the filament spool to the extruder.

G Code

A computer language used to describe the toolpath your 3D Printer will use to build an object.GCode is converted to S3G before being sent to your machine.

Heat sink

An active heat sink that dissipates heat from the cartridge heater.It looks like an aluminum plate with fins.

LCD control pannel

The liquid-crystal display in the front lower right corner of the 3D Printer.This control panel provides status information about the 3D Printer and includes control menus and diagnostics.

Plastic Filament

Polylactic acid filament.PLA is a renewable bioplastic.The plastic filament is the source material from which you make objects on the 3D Printer.

Maker Ware

Free software are created that allows you to load 3D model files, manipulate, and edit those files,and send them to 3D Printer for building.

Motor assembly

The stepper motor and the drive block that push filament into the extruder.

Motor wires

The bundle of electrical wires that provide power to motor.

Nozzle

The opening on the end of the extruder from which heated plastic filament emerges to be spread onto the build plate.

Power supply

An A/C power supply for the 3D Printer that includes a block of two plugs.

Plunger

A part of the extruder assembly.The Delrin plunger pushes the plastic filament against the drive gear.

Replicater G

Free,open source software that allows you to manipulate and edit .stl files and GCode files and send them to the 3D Printer.

S3G

A compact format for describing the toolpath your 3D Printer will use to build an object.

SD Card

Secure Digital memory card that can store digital data and be read by the 3D Printer.

Spacers

Plastic pieces that keep the extruder fan and heat sink secure and in place.

Spool holder

A part that attaches to the back of the 3D Printer and holds the spool of plastic filament.The spool holder ensures that the plastic filament is fed evenly to the 3D Printer.

STL

A widely used file format for 3D models.

THING

A file format used by MakerWare that allows you to print multiple 3D models on the same plate.

Thingiverse

A website for uploading and downloading 3D model files for use with the 3D Printer.

Threaded rod

A long rod that is threaded along its entire length.This rod allows the build platform to move up and down.

USB cable

A cable that allows the 3D Printer to communicate with a computer using the USB interface on the computer.

3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file. The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the entire object is created. Each of these layers can be seen as a thinly sliced horizontal cross-section of the eventual object.

3D printing or additive manufacturing is a process of making three dimensional solid objects from a digital file. The creation of a 3D printed object is achieved using additive processes. In an additive process an object is created by laying down successive layers of material until the entire object is created. Each of these layers can be seen as a thinly sliced horizontal cross-section of the eventual object.

To prepare the digital file created in a 3D modeling program for printing, the software slices the final model into hundreds or thousands of horizontal layers. When this prepared file is uploaded in the 3D printer, the printer creates the object layer by layer. The 3D printer reads every slice (or 2D image) and proceeds to create the object blending each layer together with no sign of the layering visible, resulting in one three dimensional object.

Not all 3D printers use the same technology to realize their objects. There are several ways to do it and all those available as of 2012 were additive, differing mainly in the way layers are build to create the final object. Some methods use melting or softening material to produce the layers. Selective laser sintering (SLS) and fused deposition modeling (FDM) are the most common technologies using this way of printing. Another method of printing is to lay liquid materials that are cured with different technologies. The most common technology using this method is called stereo lithography (SLA).

This technology uses a high power laser to fuse small particles of plastic, metal, ceramic or glass powders into a mass that has the desired three dimensional shapes. The laser selectively fuses the powdered material by scanning the cross-sections (or layers) generated by the 3D modelling program on the surface of a powder bed. After each cross-section is scanned, the powder bed is lowered by one layer thickness. Then a new layer of material is applied on top and the process is repeated until the object is completed.

All untouched powder remains as it is and becomes a support structure for the object. Therefore there is no need for any support structure which is an advantage over SLS and SLA. All unused powder can be used for the next printing. SLS was developed and patented by Dr. Carl Deckard at the University of Texas in the mid-1980s under sponsorship of DRPA.

The FDM technology works using a plastic filament or metal wire which is unwound from a coil and supplies material to an extrusion nozzle which can turn the flow on and off. The nozzle is heated to melt the material and can be moved in both horizontal and vertical directions by a numerically controlled mechanism, directly controlled by a computer-aided manufacturing (CAM) software package. The object is produced by extruding melted material to form layers as the material hardens immediately after extrusion from the nozzle.

FDM was invented by Scott Crump in the late 80's. After patenting this technology he started the company Stratasys in 1988. The software that comes with this technology automatically generates support structures if required. The machine dispenses two materials, one for the model and one form a disposable support structure.

The term fused deposition modelling and its abbreviation to FDM are trademarked by Stratasys Inc. The exactly equivalent term, fused filament fabrication (FFF), was coined by the members of the Riprap project to give a phrase that would be legally unconstrained in its use.

The main technology in which photo polymerization is used to produce a solid part from a liquid is SLA. This technology employs a vat of liquid ultraviolet curable photopolymer resin and an ultraviolet laser to build the object's layers one at a time. For each layer, the laser beam traces a cross-section of the part pattern on the surface of the liquid resin. Exposure to the ultraviolet laser light cures and solidifies the pattern traced on the resin and joins it to the layer below. After the pattern has been traced, the SLA's elevator platform descends by a distance equal to the thickness of a single layer, typically 0.05 mm to 0.15 mm (0.002″ to 0.006″). Then, a resin-filled blade sweeps across the cross section of the part, re-coating it with fresh material. On this new liquid surface, the subsequent layer pattern is traced, joining the previous layer. The complete three dimensional objects is formed by this project. Stereo lithography requires the use of supporting structures which serve to attach the part to the elevator platform.

Applications include design visualization, prototyping/CAD, metal casting, architecture, education, geospatial, healthcare and entertainment/retail. Other applications would include reconstructing fossils in palaeontology, replicating ancient and priceless artefacts in archaeology, reconstructing bones and body parts in forensic pathology and reconstructing heavily damaged evidence acquired from crime scene investigations.

As of 2010 3D printing technology was being studied by biotechnology firms and academia for possible use in tissue engineering applications where organs and body parts are built using inkjet techniques. Layers of living cells are deposited onto a gel medium and slowly built up to form three dimensional structures. Several terms have been used to refer to this field of research like: organ printing, bio-printing, and computer-aided tissue engineering.

In the last couple of years the term 3D printing has become more known and the technology has reached a broader public. Still most people haven't even heard of the term, while the technology has been in use for decades. Especially manufacturers have long used these printers in their design process to create prototypes for traditional manufacturing and research purposes. Using 3D printers for these purposes is called rapid prototyping.

In the last couple of years the term 3D printing has become more known and the technology has reached a broader public. Still most people haven't even heard of the term, while the technology has been in use for decades. Especially manufacturers have long used these printers in their design process to create prototypes for traditional manufacturing and research purposes. Using 3D printers for these purposes is called rapid prototyping.

Besides rapid prototyping, 3D printing is also used for rapid manufacturing. Rapid manufacturing is a new method of manufacturing where companies are using 3D printers for short run custom manufacturing. In this way of manufacturing the printed objects are not prototypes but the actual end user product. Here you can expect more availability of personally customized products.

Personal 3D printing or domestic 3D printing is mainly for hobbyists and enthusiasts and really started growing in 2011. Because of rapid development within this new market printers are getting cheaper and cheaper, with prices typically in the range of $250 – $2,500. This puts 3D printers into more and more hands.

The Riprap open source project really ignited this hobbyist market. For about a thousand dollars people have been able to buy the Riprap kit and put together their own personal 3D printer, complete with any customizations they were capable of making. What really speeds the development is the open source idea. Everybody working on the Riprap shares their knowledge so other people can use it and improve it again.

This rapid development of open source 3D printers is gaining interest in both the developed as well as the developing world and it enables both hyper-customization and the use of designs in the public domain to fabricate open source appropriate technology through conduits such asThingiverse and Cubify. This technology can also assist in sustainable development as such technologies are easily and economically made from readily available resources by local communities to meet their needs.

Not everybody can afford or is willing to buy their own 3D printer. Does this mean you cannot enjoy the possibilities of 3D printing? No, not to worry. There are 3D printing service bureaus like Shapeways and Ponoko that can very inexpensively print and deliver an object from a digital file that you simply upload to their user-friendly website. You can even sell your 3D designs on their website and make a little money out of it!

If you don't design your own 3D models, you can still print some very nice objects. There are model repositories such as Thingiverse, 3D Warehouse and 3D Parts Database that have model files you can download for free.

There are also companies who offer their services business-to-business. When, for instance, you have an architecture practice and you need to build model scales it is very time consuming doing this the old fashion way. There are services where you can send your digital model and they print the building on scale for you to use in client presentations. These kinds of services can already be found in a lot of different industries like dental, medical, entertainment and art.

In the history of manufacturing, subtractive methods have often come first. The province of machining (generating exact shapes with high precision) was generally a subtractive affair, from filing and turning through milling and grinding.

Additive manufacturing's earliest applications have been on the tool room end of the manufacturing spectrum. For example, rapid prototyping was one of the earliest additive variants and its mission was to reduce the lead time and cost of developing prototypes of new parts and devices, which was earlier only done with subtractive tool room methods (typically slowly and expensively). However, as the years go by and technology continually advances, additive methods are moving ever further into the production end of manufacturing. Parts that formerly were the sole province of subtractive methods can now in some cases be made more profitably via additive ones.

However, the real integration of the newer additive technologies into commercial production is essentially a matter of complementing subtractive methods rather than displacing them entirely. Predictions for the future of commercial manufacturing, starting from today's already- begun infancy period, are that manufacturing firms will need to be flexible, ever-improving users of all available technologies in order to remain competitive.

It is predicted by some additive manufacturing advocates that this technological development will change the nature of commerce, because end users will be able to do much of their own manufacturing rather than engaging in trade to buy products from other people and corporations.

3D printers capable of outputting in colour and multiple materials already exist and will continue to improve to a point where functional products will be able to be output. With effects on energy use, waste reduction, customization, product availability, medicine, art, construction and sciences, 3D printing will change the manufacturing world as we know it.

3D printers capable of outputting in colour and multiple materials already exist and will continue to improve to a point where functional products will be able to be output. With effects on energy use, waste reduction, customization, product availability, medicine, art, construction and sciences, 3D printing will change the manufacturing world as we know it.

3D printers capable of outputting in colour and multiple materials already exist and will continue to improve to a point where functional products will be able to be output. With effects on energy use, waste reduction, customization, product availability, medicine, art, construction and sciences, 3D printing will change the manufacturing world as we know it.

Our Services

  • 3D Printer

    TBS has collaborated with MakerBot USA & Flashforge of China Imparting 3D printing technology education.

  • Education

    TBS has established for imparting 3D printing technology education to student of all age category.

  • Implants

    TBS is an integrated, research based, Orthopedic Implants & Instruments manufacturing company